Supermicro X13SAE - Page 48

48
Super X13SAE/X13SAE-F User's Manual
Headers
Fan Headers
There are ve 4-pin fan headers (CPU_FAN1, CPU_FAN2, SYS_FAN1 - SYS_FAN3) on
the motherboard. Although pins 1-3 of the system fan headers are backwards compatible
with the traditional 3-pin fans, the 4-pin fans are recommended to take advantage of the fan
speed control. This allows fan speeds to be automatically adjusted based on the motherboard
temperature. Refer to the table below for pin denitions.
Fan Headers
Pin Denitions
Pin# Denition
1 Ground (Black)
2 2.5A/+12V (Red)
3 Tachometer
4 PWM_Control
Pump Power Connector
This motherboard has one +12V connector for optional CPU liquid cooling systems. When
using a liquid cooling system, attach the pump power cable to this connector (12V_PUMP_
PWR1).
Pump Power Header
Pin Denitions
Pin# Denition
1 Ground (Black)
2 2A/+12V (Red)
3 N/A
4 N/A
1. CPU_FAN1 Header
2. CPU_FAN2 Header
3. SYS_FAN1 Header
4. SYS_FAN2 Header
5. SYS_FAN3 Header
6. Pump Power Connector
DIMMA1
DIMMA2
DIMMB1
DIMMB2
USB11 (3.2 (20Gb))
USB4/5 (3.2 (5Gb))
USB6 (3.2 (5Gb))
LED4
BMC_HB_LED
UID
DP
HDMI
VGA
DVI
IPMI_LAN
USB0/1
LAN1
USB7 (3.2 (10Gb))
USB10 (3.2 (20Gb))
LAN2
USB8/9 (3.2 (10Gb))
JPL2
JPAC1
PCI-E M.2-M2
PCI-E M.2-M3
PCI-E M.2-M1
JPW1
CPU SLOT7 PCI-E 5.0 X16 CPU SLOT4 PCI-E 5.0 X8 (IN x16) PCH SLOT5 PCI-E 3.0 X4 PCH SLOT2 PCI-E 3.0 X4
SLOT1 PCI 33MHZ
BMC
BT1
MAC CODE
BMC CODE
BAR CODE
MAC CODE
BIOS LICENSE
X13SAE-F
DESIGNED IN USA
REV:1.00
JPME2
JLED1
JD1
JPG1
I-SATA0
I-SATA1
I-SATA2
I-SATA3
I-SATA4
I-SATA5
I-SATA6
I-SATA7
JWD1
PWR_LED
CATERR_LED
JSTBY1
JL1
JSD1
SYS_FAN3
SYS_FAN2
SYS_FAN1
CPU_FAN2
CPU_FAN1
JPW2
12V_PUMP_PWR1
AUDIO_FP
COM1
USB2/3
JTPM1
SP1
JF1
JBT1
JPI2C1
PCH
AUDIO
JPL1
2
6
3
1
45