Supermicro X13SAE - Page 79

Chapter 4: UEFI BIOS
79
Package C-State Limit
Use this feature to set the Package C-State limit. The options are C0/C1, C2, C3, C6, C7,
C7S, C8, C9, C10, CPU Default, and AUTO.
MonitorMWait
Select Enabled to activate MonitorMWait. The options are Disabled and Enabled.
Chipset Conguration
Warning: Setting the wrong values in the following features may cause the system to
malfunction.
System Agent (SA) Conguration
System Agent (SA) Conguration
The following System Agent information is displayed:
• VT-d
Memory conguration
Memory conguration
The following memory information will be displayed:
• Memory RC Version
• Memory Frequency
• Memory Timings (tCL-tRCD-tRP-tRAS)
• DIMMA1
• DIMMA2
• DIMMB1
• DIMMB2
Maximum Memory Frequency
This feature selects the type/speed of the memory installed. The default is Auto. All
values are in MHz.