Supermicro X13SWA-TF - Page 125

Chapter 4: UEFI BIOS
125
Intel(R) Virtual RAID on CPU
Note 1: It is available when a device is connected to the CPU slots, M.2 slots or U.2
connectors, and VMD support is enabled for the slot or connector.
Note 2: To enable a slot for VMD Support, go to Advanced -> Chipset Conguration
-> North Bridge -> IIO Conguration -> Intel VMD Technology -> Intel VMD for Volume
Management Device on CPU. After making changes on VMD conguration, reboot the
system for the changes to take e󰀨ect. Then this feature will be available under the
Advanced menu.
The following information is displayed:
• Intel(R) VROC with VMD Technology x.x.x.xxxx
• Upgrade key:
• Intel VROC Managed Controllers
All Intel VMD Controllers
The device information will be displayed in the Non-RAID Physical Disks.
Note: For detailed instructions on how to congure VROC RAID settings, please refer
to the VROC RAID Conguration User's Guide posted on the web page under the link:
https://www.supermicro.com/support/manuals/.
Driver Health
This feature displays the health information of the drivers installed in your system, including
LAN controllers, as detected by the BIOS. Select one and press <Enter> to see the details.
Note: This section is provided for reference only, for the driver health status will dif-
fer depending on the drivers installed in your system. It's also based on your system
conguration and the environment that your system is operating in.