Super X13SWA-TF User's Manual
152
D.3 Recovering the Main BIOS Block with a USB Device
This feature allows the user to recover the main BIOS image using a USB device without
additional utilities used. A USB ash or media drive can be used for this purpose. However,
a USB hard disk drive cannot be used for BIOS recovery at this time.
Note: The USB ash drive doesn't have to be bootable; however, it has to be format-
ted to FAT16/FAT32 le system.
To perform UEFI BIOS recovery using a USB device, follow the instructions below.
1. Please use a dierent machine to download the BIOS package for your motherboard or
your system from the product page available on our website at www.supermicro.com.
2. Extract the BIOS package to a USB device. Copy the BIOS ROM le [BIOSname#.###]
that is included in the BIOS package into the Root "\" directory of the USB device.
3. Rename the BIOS ROM le [BIOSname#.###] in the root directory to SUPER.ROM for
BIOS recovery use.
Note: Before recovering the main BIOS image, conrm that the SUPER.ROM le you
have is the same version or a close version meant for your motherboard.
4. Insert the USB device that contains the SUPER.ROM le into the system before you
power on the system or when the following screen appears.
To Next Page
Loading...
