Supermicro X13SWA-TF - 2.9 Jumper Settings

66
Super X13SWA-TF User's Manual
2.9 Jumper Settings
How Jumpers Work
To modify the operation of the motherboard, jumpers can be
used to choose between optional settings. Jumpers create shorts
between two pins to change the function of the connector. Pin 1
is identied with a square solder pad on the printed circuit board.
See the diagram below for an example of jumping pins 1 and 2.
Refer to the motherboard layout page for jumper locations.
Note 1: On two-pin jumpers, "Closed" means the jumper is
on and "Open" means the jumper is o󰀨 the pins.
Note 2: Unplug the power cord from all power supplies before adjusting jumper settings.
CMOS Clear
JBT1 is used to clear CMOS, which will also clear any passwords. Instead of pins, the JBT1
jumper consists of contact pads to prevent accidentally clearing the contents of CMOS.
To Clear CMOS
1. First power down the system and unplug the power cord(s).
2. Remove the cover of the chassis to access the motherboard and remove the battery
from the motherboard.
3. To clear CMOS, short the CMOS pads with a metal object such as a small screwdriver
for at least four seconds. Then remove the screwdriver (or shorting device).
4. Replace the cover, reconnect the power cord(s), and power on the system.
Note: Clearing CMOS will also clear all passwords.
Connector
Pins
Jumper
Setting
3 2 1
3 2 1
1. JBT1
5
JL1
JRK1
(RAID Key Header)
JBT1
LED8
MAC CODE
JTPM1
USB0/1
USB4/5
(USB 3.2 Gen 1)
BIOS LICENSE
BAR CODE
BAR CODE
MAC CODE
PCH
(Power LED)
AUDIO FP
COM1
USB11
(USB3.2 Gen.2x2)
JPL2
HD AUDIO
FAN6
FAND
FANC
FANBFANA
JD1
SP1
CPU
BATTERY
SATA 7
U.2-2 U.2-1
SATA 6
SATA 5
SATA 4
SATA 2
SATA 3
SATA 0
SATA 1
JPW3
JPME2
JPW2
JPW4
FAN5
FAN3 FAN4
FAN2FAN1
JPI2C1
LED1
JSTBY1
JWD1
JF1
JSD1
CPU SLOT7 PCIe 5.0 X16
JOH1
JPW1
12V_PUMP_PWR1
LAN2
(USB3.2 Gen 2x1)
USB6/7
JPUSB1
USB8/9
(USB3.2 Gen 2x1)
LAN1
USB10
(USB3.2 Gen 2X2)
JPL1
VGA
JUIDB1
CPU SLOT5 PCIe 5.0 X16 CPU SLOT6 PCIe 5.0 X16
LED4
(UID-LED)
USB2/3
BMC
CPU SLO1 PCIe 5.0 X16 CPU SLOT3 PCIe 5.0 X16
BMC LED
CPU SLOT4 PCIe 5.0 X16
JSPDIF_OUT
JPAC1
DIMMA1
DIMMA2
DIMMB2
DIMMB1
DIMMC2
DIMMC1
DIMMD2
DIMMD1
BAR CODE
BAR CODE
MAC CODE
BIOS LICENSE
PCH
(PWR I2C)
(SPEAKER 1-4)
LAN
CTRL
LAN
CTRL
DIMMG2
DIMMH1
DIMMH2
DIMMG1
DIMME2
DIMMF2
DIMMF1
DIMME1
SAS CODE
LED3 (M.2-C01 LED)
LED5 (M.2-C02 LED)
LED6 (M.2-C03 LED)
LED7 (M.2-C04 LED)
M.2-C01
(
PCIe
5.0 X4)
M.2-C02
(
PCIe
5.0 X4)
M.2-C03
(
PCIe
5.0 X4)
(PCIe 5.0 X4)
M.2-C04
X13SWA-TF
DESIGNED IN USA
REV:1.01
+
BMC CODE
1