Supermicro X13SWA-TF - Page 134

Super X13SWA-TF User's Manual
134
Security Function
Select Set Password to set an HDD/SATA password which allows you to congure the security
settings of the HDD/SATA device. Select Security Erase - Password to enter a SATA user
password to allow you to erase the password and the contents previously stored in the HDD/
SATA device. Select Security Erase - Without Password to use the manufacturer default
password "111111111" as the SATA user password and allow you to erase the contents of the
HDD/SATA device by using this default password. The options are Disable, Set Password,
Security Erase - Password, Security Erase - PSID, and Security Erase - Without Password.
Note: The option of Security Erase - PSID is based on the storage device support.
PSID is the abbreviation for Physical Security Identication.
Password
Use this feature to set the storage device user password which allows you to congure the
Supermicro Security Erase settings by using this user password.
New Password (Available when "Password" above has been set)
Use this feature to set the new user password for the storage device which allows you to
congure the Supermicro Security Erase settings by using this new user password.
HDD Security Conguration:
Px: (Storage Device Name)
This section is available when the storage device is detected by the BIOS. Select this device.
Press <Enter> and the following information is displayed:
• HDD Password Description:
• HDD PASSWORD CONFIGURATION:
• Security Supported:
• Security Enabled:
• Security Locked:
• Security Frozen:
• HDD User Pwd Status:
• HDD Master Pwd Status:
Set User Password (Available when "Security Frozen:" above is No)
Press <Enter> to set the HDD user password.