Supermicro X13SWA-TF - Page 57

57
Chapter 2: Installation
Front Panel Audio Header
A 10-pin audio header (AUDIO FP) located on the motherboard allows you to use the onboard
sound chip (ALC888S) for audio function. Connect an audio cable to this header to use this
feature. Refer to the table below for pin denitions
HD Front Panel Audio
Pin Denitions
Pin# Denition Pin# Denition
1 Microphone_Left 2 Audio_Ground
3 Microphone_Right 4 Audio_Detect
5 Line_2_Right 6 Ground
7 Jack_Detect 8 Key
9 Line_2_Left 10 Ground
JSPDIF_OUT Header
The SPDIF OUT (JSPDIF_OUT) is used for digital audio output. You will also need the
appropriate cable to use these features.
SPDIF OUT
Pin Denitions
Pin# Denition
1 S/PDIF_OUT
2 Ground
1. Front Panel Audio Header (AUDIO FP)
2. SPDIF OUT (JSPDIF_OUT)
5
JL1
JRK1
(RAID Key Header)
JBT1
LED8
MAC CODE
JTPM1
USB0/1
USB4/5
(USB 3.2 Gen 1)
BIOS LICENSE
BAR CODE
BAR CODE
MAC CODE
PCH
(Power LED)
AUDIO FP
COM1
USB11
(USB3.2 Gen.2x2)
JPL2
HD AUDIO
FAN6
FAND
FANC
FANB FANA
JD1
SP1
CPU
BATTERY
SATA 7
U.2-2 U.2-1
SATA 6
SATA 5
SATA 4
SATA 2
SATA 3
SATA 0
SATA 1
JPW3
JPME2
JPW2
JPW4
FAN5
FAN3 FAN4
FAN2FAN1
JPI2C1
LED1
JSTBY1
JWD1
JF1
JSD1
CPU SLOT7 PCIe 5.0 X16
JOH1
JPW1
12V_PUMP_PWR1
LAN2
(USB3.2 Gen 2x1)
USB6/7
JPUSB1
USB8/9
(USB3.2 Gen 2x1)
LAN1
USB10
(USB3.2 Gen 2X2)
JPL1
VGA
JUIDB1
CPU SLOT5 PCIe 5.0 X16 CPU SLOT6 PCIe 5.0 X16
LED4
(UID-LED)
USB2/3
BMC
CPU SLO1 PCIe 5.0 X16 CPU SLOT3 PCIe 5.0 X16
BMC LED
CPU SLOT4 PCIe 5.0 X16
JSPDIF_OUT
JPAC1
DIMMA1
DIMMA2
DIMMB2
DIMMB1
DIMMC2
DIMMC1
DIMMD2
DIMMD1
BAR CODE
BAR CODE
MAC CODE
BIOS LICENSE
PCH
(PWR I2C)
(SPEAKER 1-4)
LAN
CTRL
LAN
CTRL
DIMMG2
DIMMH1
DIMMH2
DIMMG1
DIMME2
DIMMF2
DIMMF1
DIMME1
SAS CODE
LED3 (M.2-C01 LED)
LED5 (M.2-C02 LED)
LED6 (M.2-C03 LED)
LED7 (M.2-C04 LED)
M.2-C01
(
PCIe
5.0 X4)
M.2-C02
(
PCIe
5.0 X4)
M.2-C03
(
PCIe
5.0 X4)
(PCIe 5.0 X4)
M.2-C04
X13SWA-TF
DESIGNED IN USA
REV:1.01
+
BMC CODE
1
2