Supermicro X13SWA-TF - Page 97

Chapter 4: UEFI BIOS
97
Intel VMD for Volume Management Device on CPU
VMD Cong for PCH ports
Enable/Disable VMD
Select Enable to enable the Intel Volume Management Device (VMD) technology
support for the root port specied. The options are Disable and Enable.
U.2-1 VMD / U.2-2 VMD (Available when the device is detected by the system
and "Enable/Disable VMD" above is set to Enable)
Select Enable to enable the Intel VMD technology support for the root port specied.
The options are Disable and Enable.
VMD Cong for IOU 0 – 6
Enable/Disable VMD
Select Enable to enable the Intel VMD technology for the PCH port or IOU. The op-
tions are Disable and Enable
Root Port VMD (Available when "Enable/Disable VMD" above is set to
Enable)
If VMD is enabled for a PCH port or IOU, use this feature to enable the Intel VMD
technology support for the corresponding root port. The options are Disable and
Enable.
PCH / IOU VMD Root Port VMD Note
PCH port U.2-1, U.2-2 VMD
IOU 0 CPU SLOT7 PCIe 5.0 X16 VMD
IOU 1 CPU SLOT3 PCIe 5.0 X16 VMD
IOU 2 CPU SLOT5 PCIe 5.0 X16 VMD
IOU 3 M.2 C04, M.2 C03, M.2 C02, M.2 C01 VMD
IOU 4 CPU SLOT6 PCIe 5.0 X16 VMD
For W-3400 CPU only
IOU 5 CPU SLOT4 PCIe 5.0 X16 VMD
For W-3400 CPU only
IOU 6 CPU SLOT1 PCIe 5.0 X16 VMD
For W-3400 CPU only
Hot Plug Capable (Available when "Enable/Disable VMD" above is set to
Enable)
Select Enable to enable Hot Plug support for the root ports specied, which allows
you to change the devices on those root ports without shutting down the system.
The options are Disable and Enable.