Chapter 4: BIOS
4-17
Console Redirection
Access the submenu to make changes to the following settings.
COM Port Address
This item allows you to specify which COM port you want to redirect the console
to: Onboard COM A or Onboard COM B. This setting can also be Disabled.
BAUD Rate
This item allows you to set the BAUD rate for console redirection. The options
are 300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, and 115.2K.
Console Type
This item allows you to select the console type for console redirection. The options
are VT100, VT100,8bit, PC-ANSI, 7bit, PC ANSI, VT100+, and VT-UTF8.
Flow Control
This item allows you to set the fl ow control for console redirection. The options
are: None, XON/XOFF, and CTS/RTS.
Console Connection
This item allows you to decide how the console is to be connected: either Direct
or Via Modem.
Continue CR after POST
This item allows you to decide if you want to continue with console redirection
after the POST routine. The options are On and Off.
To Next Page
Loading...
