Supermicro X8DT6 - Page 15

Chapter 1: Introduction
1-7
System resource alert via Supero Doctor III•
ACPI Features
Slow blinking LED for suspend state indicator•
Main switch override mechanism•
ACPI Power Management•
Keyboard Wakeup from Soft-off •
Onboard I/O
Intel ICH10R supports six SATA2 ports (with RAID0, RAID1, RAID10, RAID5 •
supported in the Windows OS Environment and RAID0, RAID1, RAID10 in the
Linux) (Note 1)
LSI 2008 SATA 2 supports eight SAS ports with RAID 5 optional, using RAIDKey
•
(Part# AOC-IMRRAKey-2008-LSI) (For X8DT6/X8DT6-F) (Note 2)
Dual Intel 82574 Gigabit Ethernet controllers support Giga-bit LAN1/LAN 2
•
ports, and Realtek PHY
One fl oppy port interface and two COM ports (1 header, 1 port)
•
One VGA Port supported by the WPCM450 BMC Controller•
PS/2 mouse and PS/2 keyboard ports•
Up to eight USB 2.0 (Universal Serial Bus) (2 Backpanel USB Ports, 2 Front •
USB Headers, and 2 Type A Headers)
Super I/O: Winbond W83627HG
•
IPMI 2.0 with full KVM support (X8DT6-F/X8DTE-F only) (Note 3)•
Other
Wake-on-LAN (WOL)•
Console redirection•
Onboard Fan Speed Control by Thermal Management via BIOS•
CD/Diskette Utilities
BIOS fl ash upgrade utility and device drivers•
Dimensions
Ext. ATX 12.00" (L) x 13.00" (W) (304.80 mm x 330.20 mm)•
Note 1: For details on Intel SATA HostRAID confi guration, please refer to
the user guide posted @http://www.supermicro.com/support/manuals/.
Note 2: For details on LSI SAS RAID confi guration, please refer to the
User's Guide @http://www.supermicro.com/support/manuals/.
Note 3: For details on IPMI confi guration, please refer to the Embedded
IPMI User's Guide posted on our web site @http://www.supermicro.com/
support/manuals/.