EasyManua.ls Logo

Supermicro X8DT6 - Ethernet Ports

Supermicro X8DT6
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2: Installation
2-15
1. LAN1
2. LAN2
3. IPMI_LAN (X8DTE-F/X8DT6-F)
Ethernet Ports
Two Ethernet ports (LAN 1/LAN2) are
located at on the IO backplane. In ad-
dition, an IPMI_dedicated_LAN is also
located on the X8DT6-F/X8DTE-F to
provide KVM support for IPMI 2.0. All
these ports accept RJ45 type cables.
Note 1: Please refer to the
appropriate item in the BIOS
Advanced Settings to enable
or disable Option ROM.
Note 2: Please refer to the
LED Indicator Section for
LAN LED information.
LAN Ports
Pin De nition
Pin# De nition
1 P2V5SB 10 SGND
2 TD0+ 11 Act LED
3 TD0- 12 P3V3SB
4 TD1+ 13 Link 100 LED
(Yellow, +3V3SB)
5 TD1- 14 Link 1000 LED
(Yellow, +3V3SB)
6 TD2+ 15 Ground
7 TD2- 16 Ground
8 TD3+ 17 Ground
9 TD3- 88 Ground
(NC: No Connection)
2
1
3
X8DT6/E Series Rev. 2.01

Table of Contents

Related product manuals