5-12
X8DTN+-F/X8DTN+-F-LR User’s Manual
be enabled. When the item - USB Functions is set to Disabled, the user has the
option to enable or disable USB 2.0 Controller.)
USB 2.0 Controller Mode
Use this feature to select the USB 2.0 Controller mode. The options are Hi-Speed
(480 Mbps) and Full Speed (12 Mbps).
BIOS EHCI Hand-Off
Select Enabled to enable BIOS Enhanced Host Controller Interface support to
provide a workaround solution for an operating system that does not support EHCI
Hand-Off. When enabled, EHCI Interface will be changed from the BIOS-controlled
to the OS-controlled. The options are Disabled and Enabled.
ME Subsystem Confi guration
This feature allows the user to confi gure ME Subsystem Confi guration settings.
ME-EHCI
Select Enabled to enable Intel ME EHCI (Management Engine Enhanced Host
Controller Interface) support. The options are Enabled and Disabled.
IDE/SATA Confi guration
When this submenu is selected, the AMI BIOS automatically detects the presence
of the IDE/SATA devices and displays the following items.
SATA#1 Confi guration
If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se-
lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled,
Compatible and Enhanced.
Confi gure SATA#1 as
This feature allows the user to select the drive type for SATA#1. The options are
IDE, RAID and AHCI. (When the option-RAID is selected, the item-ICH RAID
Code Base will appear.)
ICH RAID Code Base (This feature is available when the option-RAID is
selected)
Select Intel to enable Intel's SATA RAID fi rmware to confi gure Intel's SATA RAID
settings. Select Adaptec to enable Adaptec's SATA RAID fi rmware to confi gure
Adaptec's SATA RAID settings. The options are Intel and Adaptec.
To Next Page
Loading...
