EasyManua.ls Logo

Supermicro X8SIA - Default Chapter; About this Motherboard; Conventions Used in the Manual; Manual Organization

Supermicro X8SIA
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preface
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
X8SIA/X8SIA-F motherboard. This product is intended to be installed and
serviced only by professional technicians.
About This Motherboard
The X8SIA/X8SIA-F supports the Intel
®
Xeon
®
3400, L3400 Series, Core
TM
and Pentium
®
Series processors (LGA1156 socket), and the Intel 3420 chipset. This
server platform offers optimal reliability in a highly efcient (90%) VRM design, a
seven-plus year design life, ve expansion slots and a 12" x 9.6" ATX form-factor.
Please refer to our web site (http://www.supermicro.com/products/) for updates on
supported processors.
Manual Organization
Chapter 1 describes the features, specications and performance of the mother-
board and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes. Appendix B lists Other Software
Program Installation Instructions. Appendix C contains the BIOS Recovery In-
structions.
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury
Warning: Important information given to ensure proper system installation
or to prevent damage to the components
Note: Additional Information given to differentiate various models or pro-
vides information for correct system setup.
Preface
iii

Table of Contents

Related product manuals