1-4
X9DRD-iF/LF Motherboard User’s Manual
Notes:
•See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front panel
connections. " " indicates the location of "Pin 1".
• Jumpers/LED Indicators not indicated are for testing only. Also, components that
are not documented in this manual are reserved for internal use only.
•Use only the correct type of onboard CMOS battery as specied by the
manufacturer. Do not install the onboard battery upside down to avoid possible
explosion.
JP2 Manufacture (ME) Mode Pins 1-2 (Normal)
JPME1 ME Recovery Pins 1-2 (Normal)
JVRMI
2
C1/
JVRMI
2
C2
CPU1/CPU2 VRM SMbus Enable Pins 1-2 (Normal)
To Next Page
Loading...
Need help?
General
