To Next Page

To Previous Page

Chapter 4: AMI BIOS

4-15

Aggressive Link Power Management

Select Enabled to enable Aggressive Link Power Management support

for Cougar Point B0 stepping and beyond. The options are Enabled and

Disabled.

Port 0~5 Hot Plug

Select Enabled to enable hot-plug support for a particular port, which will

allow the user to change a hardware component or device without shutting

down the system. The options are Enabled and Disabled.

Staggered Spin Up

Select Enabled to enable Staggered Spin-up support to prevent excessive

power consumption caused by multiple HDDs spinning-up simultaneously.

The options are Enabled and Disabled.

RAID Mode

The following items are displayed when RAID Mode is selected:

Port 0~5 Hot Plug

Select Enabled to enable hot-plug support for the particular port. The options

are Enabled and Disabled.

SCU(StorageControlUnit)Conguration

Storage Controller Unit

Select Enabled to enable PCH SCU storage devices. The options are Disabled

and Enabled.

OnChip SCU Option ROM

Select Enabled to support the onboard SCU Option ROM to boot up the system via

a storage device. The options are Disabled and Enabled.

SCU Port 0~SCU Port 3: The AMI BIOS will automatically detect the onboard SCU

devices and display the status of each SCU device as detected.

Supermicro X9DRD-iF User Manual

Questions and Answers: