EasyManuals Logo

Supero Super X8DTL-3 User Manual

Default Icon
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Chapter 2: Installation
2-9
Memory Support for the Motherboard w/5600 Processors Installed
1.5V Registered DIMMs (for the PCB R2.01 or a later version board only)
1.5V RDIMM Population for a motherboard w/5600 Processors Installed
DIMM
Slots per
Channel
DIMMs
Populated
per Channel
DIMM Type
(Reg.=Registered)
Speeds (in MHz) Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
1 1 Reg. DDR3 ECC 800,1066,1333 SR or DR
1 1 Reg. DDR3 ECC 800,1066 QR
Note 1: 1333 MHz RDIMMs will run at 1066 MHz (-BIOS automatic downgrading).
1.5V Unbuffered DIMMs (for the PCB R2.01 or a later version board only)
1.5V UDIMM Population for for a motherboard w/5600 Processors Installed
DIMM
Slots per
Channel
DIMMs
Populated
per Channel
DIMM Type (Unb.=
Unbufered)
Speeds (in MHz) Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
1 1 Unb. DDR3 ECC/Non-ECC 800,1066,1333 SR, DR, Mixing
SR, DR
Note 1: MIxing of 1.35V and 1.5V DIMMs is not recommended.
1.35V Registered DIMMs (for the PCB R2.01 or a later version board only)
1.35V RDIMM Population a Motherboard w/5600 Processors Installed
DIMM
Slots per
Channel
DIMMs
Populated
per Channel
DIMM Type
(Reg.=Registered)
Speeds (in MHz) Ranks per DIMM (any
combination; SR=Single
Rank,
DR=Dual Rank,
QR=Quad Rank)
1 1 Reg. DDR3 ECC 800,1066,1333 SR, DR, Mixing SR, DR
1 1 Reg. DDR3 ECC 800 (Note 1) QR
Note 1: 1333/1066 MHz QR RDIMMs will run at 800 MHz (-BIOS automatic downgrading).
Note 2: MIxing of 1.35V and 1.5V DIMMs is not recommended.
1.35V Unbuffered DIMMs (for the PCB R2.01 or a later version board only)
1.35V UDIMM Population for a motherboard w/5600 Processors Installed
DIMM
Slots per
Channel
DIMMs
Populated
per Channel
DIMM Type (Unb.=
Unbufered)
Speeds (in MHz) Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
1 1 Unb. DDR3 ECC 800,1066,1333 SR or DR
Note 1: 1333 MHz for two DIMMs per channel is supported when Unbuf./ECC DIMMs are used.
Note 2: MIxing of 1.35V and 1.5V DIMMs is not recommended.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supero Super X8DTL-3 and is the answer not in the manual?

Supero Super X8DTL-3 Specifications

General IconGeneral
BrandSupero
ModelSuper X8DTL-3
CategoryMotherboard
LanguageEnglish

Related product manuals