4-24
X8DTL-3/X8DTL-i/X8DTL-3F/X8DTL-iF User's Manual
Mark all events as read
Select "OK" to mark all events as read. The options are OK and Cancel.
Clear event log
Select "OK" to clear all messages from the Event Log. The options are OK and
Cancel.
PCIE Error Log
Select Yes to enable PCI-E error (PERR) logging. The options are Yes and No.
Memory ECC Error Log
Select Yes to activate and display ECC Memory Error event log. The options are
Yes and No.
4-4 Security Settings
The AMI BIOS provides a Supervisor and a User password. If you use both pass-
words, the Supervisor password must be set fi rst.
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
To Next Page
Loading...
Need help?
General
