EasyManua.ls Logo

Supero X10DRL-i - Motherboard Features

Default Icon
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1: Overview
1-7
Motherboard Features
CPU
• Dual Intel
®
E5-2600V3 Series Processors (Socket
R3-LGA 2011); each processor supports dual full-
width Intel QuickPath Interconnect (QPI) links (of up
to 9.6 GT/s one direction per QPI)
Memory
• Integrated memory controller supports: Up to 512
GB of DDR4 (288-pin) Registered (RDIMM)/Load
Reduced (LRDIMM) ECC 2133/1866/1600 MHz in
8 slots
Note 1: Memory speed support depends on the
CPUs installed in the system.
Note 2: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM sizes
• DIMM 4GB, 8GB,16GB, 32GB, QR/LRDIMM
or 8R/LRDIMM @ 1.2V
Chipset
• Intel® PCH C612
Expansion
• Three (3) PCI Express 3.0 x8 slots (CPU1 Slot2/
CPU1 Slot3/CPU1 Slot6),
• One (1) PCI-Express 3.0 x16 slot (CPU1 Slot5),
• One (1) PCI-Express 3.0 x4 in x8 slot (CPU2 Slot4),
• One (1) PCI-Express 2.0 x4 in x8 slot (PCH Slot1)
Slots
Graphics
• Graphics Controller via Aspeed 2400 BMC
Network
• Dual Intel i210 Gigabit (10/100/1000 Mb/s) single-
port Ethernet controllers for LAN 1/LAN 2 ports
• Aspeed 2400 Base-board Controller (BMC) supports
IPMI_LAN 2.0
I/O Devices
SATA Connections
• SATA Ports Six (6) SATA 3.0 Ports support-
ed by Intel PCH (I-SATA 0-5),
Four (4) SATA 3.0 Ports support-
ed by Intel SCU (S-SATA 0-3)
• RAID RAID 0, 1, 5, 10
IPMI 2.0
• IPMI 2.0 supported by Aspeed 2400

Table of Contents

Related product manuals