Need help?Do you have a question about the Supero X10SLQ and is the answer not in the manual?
General| CPU Socket | LGA 1150 |
|---|---|
| Chipset | Intel C222 |
| Max Memory | 32GB |
| Form Factor | Micro ATX |
| CPU | Intel Xeon E3-1200 v3, 4th Gen Core i3, Pentium, Celeron |
| Memory Slots | 4 |
| Memory | DDR3 1600/1333 MHz |
| Expansion Slots | 1 x PCIe 3.0 x16, 1 x PCIe 2.0 x4 (in x8), 1 x PCIe 2.0 x1, 1 x PCI |
| LAN | 2 x Gigabit LAN |
| USB | USB 3.0, USB 2.0 |
| USB Ports | 4 x USB 3.0 (2 rear, 2 via header) |
| Dimensions | 9.6" x 9.6" |
| Video Output | VGA |
| Audio | HD Audio |
Describes the motherboard's features and specifications.
Outlines the manual's structure and chapter contents.
Explains symbols used for warnings and important notes.
Provides contact details for Supermicro's main office.
Provides contact details for Supermicro Europe.
Provides contact details for Supermicro Asia-Pacific.
General introduction and list of included motherboard components.
Visual representation of the motherboard with key components labeled.
Details the physical layout of motherboard connectors and headers.
Lists and explains the function of various motherboard jumpers.
Provides a comprehensive list of all onboard headers and connectors.
Explains the function and status of onboard LEDs.
Details supported CPU types and memory slot configurations.
Identifies the onboard chipset and lists expansion slots.
Covers LAN ports, SATA, USB, Keyboard/Mouse, and Serial ports.
Describes display outputs, audio features, and the Super I/O chip.
Outlines BIOS features, power management, and system monitoring.
Lists system management tools and capabilities.
Information on CD contents, compliance, and physical size.
Visual representation of the motherboard's architecture and data flow.
Detailed description of the Intel Q87 Express chipset features.
Covers AC Power Loss recovery and other unique functionalities.
Details voltage, fan, and temperature monitoring features.
Explains ACPI and the necessary power supply specifications.
Describes the Super I/O chip and its serial port capabilities.
Industry-standard warnings for user safety and handling.
Instructions and warnings for handling batteries.
Guidelines for proper disposal of the motherboard and components.
Precautions for ESD sensitive components and unpacking.
Step-by-step guide to installing the CPU into the socket.
Instructions for mounting the CPU heatsink and fan assembly.
Instructions for safely removing the CPU heatsink.
Step-by-step guide for installing RAM modules into the slots.
Instructions for removing RAM and details on memory support.
Explains how system memory is allocated and its availability.
Lists required tools and describes chassis mounting hole locations.
Step-by-step guide for physically installing the motherboard into the computer case.
Identifies and explains the rear panel connectors and ports.
Details PS/2 connection options and pinouts for keyboard/mouse.
Describes all USB ports and their respective pin definitions.
Information on Gigabit Ethernet ports and HD audio connectors.
Describes front panel audio header and rear display connections.
Describes VGA and DVI-D video outputs and their locations.
Explains front panel header connections for system buttons and indicators.
Details pin definitions for the Power and HDD activity LEDs.
Explains LED indicators for LAN activity and system status.
Details pin definitions for the system reset and power buttons.
Describes the 24-pin ATX and 4-pin CPU power connectors.
Explains fan connectors and the chassis intrusion header.
Describes internal buzzer and speaker connections.
Details power LED header and COM port pinouts.
Explains DOM power and Wake-On-Ring headers.
Details TPM, Port 80, and Standby Power headers.
Explains T-SGPIO headers for system performance.
Configuration for enabling/disabling onboard LAN ports.
Explains CMOS clear jumper and PCI SMB enable jumpers.
Configuration for onboard audio and watch dog timer.
Instructions for Management Engine firmware recovery.
Details the JBR1 jumper for BIOS recovery procedures.
Explains LAN port link and activity LEDs.
Describes the motherboard's power status LED.
Details SATA 3.0 ports and mSATA support.
General steps for troubleshooting system issues.
Initial checks to perform before powering the system on.
Troubleshooting steps for systems with no power or no video.
Steps to diagnose memory issues and causes of BIOS setting loss.
How to contact Supermicro support and required information.
Common questions and answers regarding the motherboard.
Information on updating and recovering the BIOS.
Instructions for removing and installing the CMOS battery.
Guidelines for battery disposal and returning merchandise for service.
Overview of the AMI BIOS setup utility and its navigation.
How to enter the BIOS setup utility during system boot.
Description of the main BIOS configuration screen and key usage.
BIOS settings related to the boot process and display.
BIOS options for boot behavior, error handling, and power configuration.
Specific CPU settings like signature, speed, cores, and HT technology.
CPU features like Virtualization, Prefetcher, and AES support.
Settings for turbo mode, CPU power limits, and core ratios.
Power saving features related to CPU states and energy efficiency.
BIOS settings for ACPI, Chipset, and System Agent interfaces.
Settings for integrated graphics and display outputs.
Controls for primary display selection and graphics memory allocation.
Settings for PCI Express slots and devices.
Details on memory settings like voltage, frequency.
Settings for USB controllers and PCH-IO interface.
Settings for audio output type and SATA controller modes.
Settings for PCI/PnP devices, ROM support, and boot priority.
Settings for network boot options and ACPI sleep states.
Settings for TPM, Intel TXT, and PCH firmware.
Settings for ME firmware updates and Active Management Technology.
Settings for acoustic management and serial port configurations.
System monitoring details and fan speed control settings.
Settings for remote console access via serial port.
Configures the order of bootable devices for system startup.
Setting and managing BIOS administrator passwords for system security.
Quits BIOS setup without saving any configuration changes.
Saves current BIOS settings and reboots the computer.
Options to save/restore custom BIOS settings and select boot options.
Lists beep codes, error messages, and their corresponding descriptions.
Guide to installing drivers from the included CD for system functionality.
Instructions for setting up and using the SuperDoctor III monitoring tool.
Explains the Unified Extensible Firmware Interface and its role.
Describes the process of recovering a corrupted main BIOS image.
Step-by-step guide for BIOS recovery using a USB flash drive.
Explains the dual boot block feature for BIOS recovery.
Describes scenarios and recovery for boot block corruption.
Steps to reboot the system using the JBR1 jumper for recovery.
To Next Page
