To Next Page

To Previous Page

Chapter 4: AMI BIOS

4-29

4-5 Security Settings

This menu allows the user to congure the following security settings for the

system.

• If the Administrator password is dened ONLY - this controls access to the

BIOS setup ONLY.

• If the User's password is dened ONLY - this password will need to be entered

upon each system boot, and will also have Administrator rights in the setup.

• Passwords must be at least 3 and up to 20 characters long.

Administrator Password

Use this feature to set the Administrator Password which is required to enter the

BIOS setup utility. The length of the password should be from 3 characters to 20

characters long.

Main Advanced SecurityBoot Exit

 : Select Screen

 : Select Item

Enter: Select

+/- : Change Opt.

F1 : General Help

F2 : Previous Values

F3 : Optimized Defaults

F4 : Save & Exit

ESC : Exit

Set Administrator Password.

Password Description

If ONLY the administrator’s password is set,

then this only limits access to Setup and is

only asked for when entering Setup.

If ONLY the User’s password is set, then this

is a power on password and must be entered to

boot or enter Setup. In Setup the User will

have Administrator rights.

The password length must be

in the following range:

Minimum length 3

Maximum length 20

Administrator Password

Supero X10SLQ User Manual

Other manuals for Supero X10SLQ