Supero X10SLQ - Advanced Setup: Acoustic Mgmt, Serial Port

4-22
X10SLQ/X10SLQ-L User’s Manual

Acoustic Management Conguration
Acoustic Management Conguration
Automatic Acoustic Management
Select Enabled to support automatic acoustic management for your system. The
options are Enabled and Disabled.

Super IO Conguration
Super IO Chip NCT6776F (for Serial Port1/Serial Port2 Conguration)/Super
IO Chip IT8760 (for Serial Port3/Serial Port4 Conguration)

Serial Port 1 Conguration/Serial Port 2 Conguration/Serial Port 3
Conguration//Serial Port 4 Conguration
Select Enabled to enable the onboard serial port specied by the user. The op-
tions are Enabled and Disabled.
Device Settings
This item displays the base I/O port address and the Interrupt Request ad-
dress of a serial port specied by the user.
Change Settings
This feature species the base I/O port address and the Interrupt Request
address of Serial Port 1, Serial Port 2, Serial Port 3, or Serial Port 4. Select
Auto to allow the BIOS to automatically assign the base I/O and IRQ address
to a serial port specied.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11,
12), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4,
5, 6, 7, 9, 10, 11, 12).
The options for Serial Port 2 are Auto, (IO=2F8h; IRQ=3), (IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11,
12), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4,
5, 6, 7, 9, 10, 11, 12).
The options for Serial Port 3 are Auto, (IO=3E8h; IRQ=11), (IO=3D0h;
IRQ=11), (IO=3D8h; IRQ=11), and (IO=3E0h; IRQ=11).
The options for Serial Port 4 are Auto, (IO=2E8h; IRQ=10), (IO=2D0h;
IRQ=10), (IO=2D8h; IRQ=10), and (IO=2E0h; IRQ=10).