Supero X10SLQ User Manual

2-12
X10SLQ/X10SLQ-L User’s Manual
Removing Memory Modules
Reverse the steps above to remove the DIMM modules from the motherboard.
Memory Support
The X10SLQ supports up to 32GB of Unbuffered (UDIMM) DDR3 Non-ECC
1600/1333 MHz in 4 memory slots. Populating these DIMM modules with a pair
of memory modules of the same type and same size will result in interleaved
memory, which will improve memory performance.
The X10SLQ-L supports up to 16 GB of Unbuffered (UDIMM) DDR3 Non-ECC
1600/1333 MHz in 2 memory slots. Populating these DIMM modules with a pair
of memory modules of the same type and same size will result in interleaved
memory, which will improve memory performance.
Please refer to the table below:
Memory Population Guidelines
Please follow the table below when populating the X10SLQ/X10SLQ-L.
DDR3 Unbuffered Non-ECC (UDIMM) Memory
DIMM Slots per
Channel
DIMMs Populat-
ed per Channel
DIMM Type POR Speeds Ranks per DIMM (any
combination)
2 1 Unbuffered
DDR3
1333, 1600 Single Rank, Dual Rank
2 2 Unbuffered
DDR3
1333, 1600 Single Rank, Dual Rank
Notes:
•Be sure to use memory modules of the same type, same speed, same
frequency on the same motherboard. Mixing of memory modules of dif-
ferent types and speeds is not allowed.
Channel B, Slot2
(Blue Slot)
Channel B, Slot1
Channel A, Slot1
Channel A, Slot2
(Blue Slot)
Towards the edge of the motherboard
Towards the CPU
Not available on the -L model
Not available on the -L model
Not available on the -L model

Supero X10SLQ Specifications

General

Brand	Supero
Model	X10SLQ
Category	Motherboard
Language	English