4-8
X10SLQ/X10SLQ-L User’s Manual
EIST
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically
adjust processor voltage and core frequency in an effort to reduce power consump-
tion and heat dissipation. Please refer to Intel’s web site for detailed information.
The options are Disabled and Enabled.
Turbo Mode
This feature allows processor cores to run faster than the frequency recommended
by the manufacturer. The options are Disabled and Enabled. If this feature is set
to Enabled, the following items will display:
CPU Power Limit1 (Available when "Turbo Mode" is set to Enabled)
Use this feature to set the power limit for CPU1. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacture default setting.
CPU Power Limit1 Time (Available when "Turbo Mode" is set to Enabled)
This item allows the user to determine how long CPU1 should operate at the
power limit set by the user for the item above. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacture default setting.
CPU Power Limit2 (Available when "Turbo Mode" is set to Enabled)
Use this feature to set the power limit for CPU2. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacture default setting.
DDR Power Limit1 (Available when "Turbo Mode" is set to Enabled)
Use this feature to set the power limit for DDR1. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacture default setting.
DDR Power Limit1 Time (Available when "Turbo Mode" is set to Enabled)
This item allows the user to determine how long DDR1 should operate at the
power limit set by the item above. Use the number keys on your keyboard to
enter the value. Enter 0 to use the manufacture default setting.
DDR Power Limit2 (Available when "Turbo Mode" is set to Enabled)
Use this feature to set the power limit for DDR2. Use the number keys on your
keyboard to enter the value. Enter 0 to use the manufacture default setting.
1-Core Ratio Limit (Available when "Turbo Mode" is set to Enabled)
This increases (multiplies) 1 clock speed in the CPU core in relation to the bus
speed when one CPU core is active. Press "+" or "-" on your keyboard to change
the value. Enter 0 to use the manufacture default setting.
To Next Page
Loading...
Need help?
General
