To Next Page

To Previous Page

4-18

X10SLQ/X10SLQ-L User’s Manual



PCIe/PCI/PnP Conguration

This feature allows the user to set the PCI/PnP congurations for the following items:

Above 4G Decoding

Select Enabled for 64-bit devices to be decoded above the 4GB address space

If 64bit PCI decoding is supported by the system. The options are Disabled and

Enabled.

VGA Palette Snoop

Select Enabled to support VGA palette register snooping which will allow the

PCI cards that do not contain their own VGA color palette to examine the video

cards palette and mimic it for proper color display. The options are Disabled and

Enabled.

PERR# Generation

Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus

Signal Error Event. The options are Enabled and Disabled.

SERR# Generation

Select Enabled to allow a PCI device to generate an SERR number for a PCI Bus

Signal Error Event. The options are Enabled and Disabled.

Slot4 PCI-E 2.0 x4 OPROM/Slot5 PCI-E 2.0 x1 OPROM/Slot7 PCI-E 3.0 x16

OPROM

Use this feature to enable or disable PCI-Express slot Option ROM support to boot

the computer using a device installed on a slot specied by the user. The options

are Disabled, Legacy and EFI.

Launch Storage OPROM Policy

This feature controls how the system executes UEFI (Unied Extensible Firmware

Interface), and legacy storage OPROM. Select Legacy Only to boot the system

using a legacy device installed in a PCI slot. The options are Do Not Launch, UEFI

Only and Legacy Only.

Other PCI Device ROM Priority

This feature selects a PCI device OPROM to launch for system boot if this device

is not a network, mass storage, or video device. The options are UEFI Only and

Legacy Only.

Supero X10SLQ User Manual

Other manuals for Supero X10SLQ