10
9. How to use the SUPERTOOTH HD-L?
IMPORTANT:
The kit needs to be ‘paired’ to your Bluetooth mobile phone first, before
you can use the following functions. See section 5. Selecting language
and Pairing to your Bluetooth Mobile Phone.
Make Phone calls
Use your voice to make phone calls
Press the Volume Control button (1) for one second.
And the kit will activate the voice dial features on your phone. Via
the handsfree a beep will be heard to prompt you to say the voice
tag of the contact to call. Say the voice tag exactly as how you
recorded it. The voice tag will be played back to you and then the
phone will dial the number automatically.
This function can be used if supported by connected phone. Please
note efficiency depends only on connected phone.
Note: Before using this feature, make sure that the voice dialing
function of your phone is activated. Some phones need to have at
least one voice tag recorded in the phone’s memory, not on the
SIM card! (Kindly refer to your phone’s manual.)
Redial last number
In stand by mode, press the Volume Control button (1) for 3 seconds
to redial the last number you called.
Use your phone to make calls
You can also make calls manually using your phone. The audio will
automatically be transferred to the handsfree kit.
To Next Page
Loading...
