14
Multipoint
The SUPERTOOTH HD-L can simultaneously connect to 2 Bluetooth
devices. The SUPERTOOTH HD-L is active on both mobile phones. User
actions (voice dial, redial) will control the primary phone, but an
incoming call on any of the two phones can be accepted or rejected
from the SUPERTOOTH HD-L.
Multi-Point Pairing Procedure:
1. Turn off the handsfree kit by pressing the On/Off button (7) until the LED
flashes red.
2. Pair the additional phone referring to 2. Pair an additional phone in the
section 5. This phone will now be the primary phone.
3. Then connect 1
st
phone manually after the 2
nd
phone successfully
paired.
Using Multi-Point:
Refer to 2. Basic operations
in the section 9.
Note:
Voice dial and re-dial will be done using the primary phone only.
You can accept, reject or ignore calls from any of the two phones.
When you already have an ongoing call on the 1
st
phone, if you
receive a call on the 2
nd
phone, you will hear a special ringtone during
the ongoing communication.
Note: The Voice answer function is disabled when you have an ongoing
call. This allows you to say goodbye before to answer the second call.
To end the current call and accept the second incoming call:
Short press the Volume Control button (1); it will end the current call and
accept the second call. The audio of the second call will automatically
be heard through the handsfree kit.
To place the current call on-hold and accept the second incoming call:
Double short press the Volume Control button (1); it will hold the current
call and answer the second call. The audio of the second call will
automatically be heard through the handsfree kit.
To Next Page
Loading...
