7
When the download is complete, the kit will say, “Loading Phonebook
Successful. SUPERTOOTH HD-L ready.” the handsfree kit is now ready to
use.
Note: After pairing, most phones automatically connect to the kit. With
some phones you will need to connect to the kit manually. Go to
Bluetooth > Paired devices > highlight SUPERTOOTH HD-L > press Options >
then press Connect. Or press the Volume Control Button (1) to connect to
handsfree kit.
6. Manual Phonebook Transfer to the SUPERTOOTH HD-L
If the automatic phonebook transfer failed, you can send or transfer your
contacts to the SUPERTOOTH HD-L by sending them via Bluetooth.
IMPORTANT:
This procedure will only work right after the pairing (see section 5.
Selecting language and Pairing to your Bluetooth Mobile Phone
) or right
after the phonebook update (see section 7. Phonebook Update
).
Note: For some phones, if you modify the phonebook; to consider the
changes, you might need to turn off the phone then turn it on. Once the
phone is connected to the SUPERTOOTH HD-L, execute the Manual
Transfer of the Phonebook.
Procedure:
1. There are two ways to proceed with the procedure depending on
your phone model.
The common way is:
a. Go to the Phonebook of your phone.
b. Choose a contact or group of contacts you want to send to the
kit.
Note: Choose “Mark all” (if this option is available in your phone)
to be able to send all contacts at one time. However, there are
phones that do not support sending all contacts at one time.
Thus, you need to send them one by one.
To Next Page
Loading...
