18
Changing the SUPERTOOTH HD-L Language:
The SUPERTOOTH HD-L must be set to pairing mode (from off, press
and hold the On / Off button (7) until the Bluetooth indicator (2) turns
blinking red/blue. The kit is now on pairing mode.).
Once your kit is on pairing mode the kit will say, “Press Volume Control
(1) to select British English.” The SUPERTOOTH HD-L will cycle through all
available languages. Short press the Volume Control button (1) when
you hear your language.
Ignore the vocal procedure and turn off the kit by pressing the On /
Off button (7) for 1 second. The next time you will turn on the kit, the
selected language will be active.
To Next Page
Loading...
