4
3. Charging
Your SUPERTOOTH HD-L announces the battery level when you turn it on. If
the SUPERTOOTH HD-L says “Battery low”, the Bluetooth indicator (2) will
turn blinking red. The kit needs to be charged.
1. Connect the charger’s plug into the Charger Port (5) of the
SUPERTOOTH HD-L. Connect the charger to an external power source.
Charge Indicator (6) Status:
Steady Orange: Charging Speech: Charging
Steady Green: Battery Full
2. When fully charged, disconnect the charger.
4. Power On/Off
1. Power On:
Press the On/Off Button (7) for 1 second. A starting notification sound will
be heard and the kit will announce its battery level then say, “Connected
to phone” (or, if phone not available: “No phone found”). The Bluetooth
Indicator (2) will turn blinking blue.
2. Power Off:
Press the On/Off Button (7) for 1 second. An ending notification sound will
be heard and the kit will say, “SUPERTOOTH HD-L powering down.” The
Bluetooth Indicator (2) will turn off.
To Next Page
Loading...
