Supra Vision Control User Manual

2023-11-30 37 2301122
Switches
Touch the Switches tab at the bottom of the display and the screen to the right will appear.
The Heater has three settings: Off, Low and HI.
Touch the button repeatedly for the desired
setting.
The Driver and Passenger Seat Heaters, Bilge
and Blower are all turned on or off by touching
them.
Turning on the Smartseat setting will adjust the
driver’s seat according to the Pitch and Roll values.
Autoleveling
Autoleveling is a system that utilizes an inclinometer sensor to calculate the roll of a boat and
correct the roll to be as level as possible while staying within the set parameters.
For Autoleveling to occur, ALL of the following conditions must be met:
• The active profile must be Cruise or Back to Dock.
• AutoWake must be On.

Supra Vision Control Specifications

General

Brand	Supra
Model	Vision Control
Category	Monitor
Language	English