2. Place the motor switch in the OFF position；
3. Turn the key switch to the ON position；
4. Press and hold the ABS switch for 3 seconds and then release, the rear wheels ABS function is
now turned off, and the ABS indicator light flashes at a frequency of 0.2 second; Then press and
hold the ABS switch again for 3 seconds and release it, and the ABS function will switch back to
ON state; press and hold the ABS switch again for 3 seconds, now all ABS functions are turned
OFF, and the ABS warning light flashes at a frequency of 1.2 second。
Warning! When ABS is disabled, the electric motorcycle will be able to operate as a motorcycle
without ABS function, and the braking distance may increase
Caution: When the ABS system is disabled, the ABS indicator will continue to flash (1.2 second a
time).
Reactivate ABS
1. Every time the key switch is turned ON, the ABS system is activated by default。
2. Activating and deactivating the ABS system are the same operations, which can restore the
ABS system from the OFF state to the ON state。
ABS indicator
① When the ABS system detects a fault, the ABS fault indicator will light up. If the fault is
eliminated, the ABS warning light will disappear when the motorcycle speed reaches 5km/h
in the current states or turn ON the key switch and reaches the speed of 5km/h next time；
② When the ABS is in the ON mode and the speed of your electric motorcycle reaches 5km/h,
the ABS indicator light goes out，
③ When the ABS is in the off mode, the ABS warning light flashes at a frequency of 1 time/sec；
④ When the ABS switch is pressed, the ABS warning light flashes at a frequency of 2.5 times/sec,
but when the ABS switch is pressed for more than 30s, the ABS warning light is always on；
⑤ When the ABS is in the diagnosis mode, the ABS warning light is on。
Warning! When your Storm Bee electric motorcycle exceeds 5km/h, if the ABS indicator light is
still on, It indicates that the ABS system is malfunctioning, and the ABS may not work normally.
Please contact the authorized dealer or manufacturer for after-sales repair in time. When the
ABS system does not work, your Stormbee electric motorcycle will operate as a motorcycle
without ABS, which may increase the braking distance and may cause unpredictable conditions.
4.8
Warning! ABS work requires comparing the relative speed of the front and rear wheels. Failure
to use the tires specified by the manufacturer may adversely affect the ABS function and the
braking distance of the Stormbee electric motorcycle
Warning! If the speed of the front and rear wheels changes greatly, such as during a wheel lock
up or off-road riding, the ABS indicator will light up and ABS will be disabled.
Caution: To reactivate the ABS, please stop the Storm Bee electric motorcycle completely, then
turn the key switch key to the off position, wait for about 5s, and then return it to the ON
position. Once both wheels reach 5km/h and are fully functional, the ABS light should go out
To Next Page
Loading...
