Note: The appearance of rear shock absorber in different brands may be different, please refer
to the actual product.
Rebound adjustment——FASTACE、KKE
The rebound adjustment screw ○B is located at the bottom of the rear shock absorber. "+"
printed on the adjustment screw means hard (slower rebound), "-" means soft (faster rebound)
• Turn the rebound adjusting screw ○B clockwise in the "+" direction to reduce the rebound
speed.
•Turn the rebound adjusting screw ○B counterclockwise in the "-" direction to increase the
rebound speed.
Note: The appearance of rear shock absorber in different brands may be different, please refer
to the actual product.
Rear shock preload adjustment——FASTACE、KKE
1. Loosen the spring lock ring ○A.
2. Use an adjusting wrench to turn the adjusting ring ○B.
To Next Page
Loading...
