What is JAB3+?
Four connectors for external potentiometers are pre-mounted on the board for easy control of
audio system in case of you want to integrate JAB3+ in a cabinet. In addition to hardware control,
with the connection of WONDOM ICP3 or higher versions, JAB3+ supports programming with
SigmaStudio or remote control through APP or PC UI.
Signal Level Sensor System, Power Management Circuit and full protection are equipped in JAB3+
for lower power consumption, higher efficiency and stable operation.
Key Features:
- Integrated with Bluetooth V5.0 & ADAU1701 DSP
- Supporting programming with SigmaStudio or remote control via
APP or PC UI
- Cascadable with Standard Amplifier Boards for Audio 4.0/2.1 System
- External potentiometers for hardware control
To Next Page
Loading...
