45
3.14 Security Setting
By setting up this security setting, keep your LAN away from hacker attack.
DoS stands for Denial of Service. It’s a method the hackers use to prevent or deny legitimate users
access to a computer. DoS attacks are typically executed using DoS tools that send many requests packets
to a targeted Internet server (usually Web, FTP, or Mail server), which floods the
server's resources, making the system unusable. Any system that is connected to the Internet and
is equipped with TCP-based network services is subject to attack. To prevent DoS Attack, set up
the below option.
• DoS Attack Defense: Enter the time you want to make the DoS Attack Defense enabled. Enter
“0” to disable. By enable this function, router will cut off the connection which sends a great quantity of
packet on irregular continuous condition over the time you set.
• Hide Public IP Address: Select “Yes” to activate this function or not. When enabling this
function, outside users will not know your WAN IP Address.
To Next Page
Loading...
Need help?
General
