4
1. Introduction
The 16-Port 100/10M N-Way Rack-Mount Smart Switch is the latest design in its N-Way
Switches series for easy installation and high-performance in an environment where traffic on the
network and the number of users increase continuously. Provide 16-Port 100/10M Ethernet Switch
support Auto MDI/MDI-X. Small businesses and corporate branch offices can take full advantage
of 100Mbps Fast Ethernet performance and preserve existing desktop investment with no changes
required to PCs, NICs, cabling,drivers, or PC configurations.
1.1 Feature and Benefit
Feature
1. Provide 16-Port 100/10M Ethernet Switch to support Auto MDI/MDI-X
2. Provide one fiber slide-in port for expansion the workgroup distance to 2,000 meters
3. Provide back-pressure in half-duplex and flow control in full-duplex
4. Store-and-forward switching scheme capability supports rate adaptation and ensures data
integrity
5. N-way Auto-negotiation on each RJ-45 port. This allows for auto-sensing of speed
(100/10Mbps) and auto-detecting mode (full-duplex or half-duplex) thereby providing
you with automatic and flexible solutions in your network connections
6. Auto-polarity detection for correction of incorrect polarity on the received twisted-pair
7. Data fowarding rate 148,800 pps per port at 100% of wire-speed
8. Data filtering rate eliminates all error packets, runts, etc. at 148,800pps per port at 100% of wire
speed
9. Conform to IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX /FX, and IEEE 802.3x
flow control for full-duplex standards
10. Provide non-blocking sixteen ports full-wire speed access
11. Support one fiber slide-in port for expansion with the 16th port
12. Full/half-duplex mode operation on all ports
13. Auto-negotiation capability
14. Source address learning and aging function
15. Provide 8K MAC address and 1.25Mbits SSRAM buffer
16. LEDs to indicate Power, link/activity, full-duplex/collision, and 100 status
17. Support up to 32 VLAN groups for port pased VLAN.
To Next Page
Loading...
Need help?
General
