Batteries
First remove the mat, then turn the
feeder upside down to access the
battery compartments.
Insert the batteries. Ensure the +/-
symbols on the batteries match the
symbols on the feeder itself.
Remove the battery covers
Replace the battery covers
1
3
2
4
Always use 4 good quality 1.5V alkaline C Cell batteries. This will ensure the
best performance of your feeder. This product is not designed for use with
rechargeable batteries. The light at the back of the feeder will flash red every few
seconds if the batteries are low.
+ +
- -
+
-
To Next Page
Loading...
