SureShade Power Bimini - OPERATION; HELM-MOUNTED CONTROL

13
Rev: 02.07.20 lci1.com574-537-8900 CCD-0003622
OPERATION
HELMMOUNTED CONTROL SWITCH
TOOLS REQUIRED:
1. None
PARTS REQUIRED:
A. Control switch
B. SureShade Power Bimini
C. Bimini top (canvas)
D. Boot (bimini top)
The SureShade Power Bimini top can be operated in four dierent positions.
Full Open Position
Remove protective boot. Press and hold the switch until motors
turn o—do not release switch until both actuator motors
turno.
Note: Maximum speed limit is 25 MPH.
Vari-pitch Position
Remove protective boot. Press and hold the switch until desired
position is reached, then release switch.
Note: Maximum speed limit is 5 MPH.
Radar Position
Install protective boot. Press and hold the switch until motors turn
o—do not release switch until both actuator motors turn o.
Note: Maximum speed limit is 50 MPH.
Full Down Position
Install protective boot. Press and hold the switch until motors turn
o—do not release switch until both actuator motors turn o.
Note: Maximum speed limit with boot installed is 65 MPH.
Note: Maximum speed limit without boot installed is 5 MPH.