CONTROLS,
EQUIPMENT
AND ADJUSTMENTS
KEY
D
Two keys come with this motorcy-
cle. Keep the spare key in a safe
place. An identifying number is
stamped on the plate. Use this
number when making a replace-
ment key.
Please write down your key num-
ber in the box provided for your
future reference.
I Key number:
IGNITION SWITCH
The ignition switch has 4 posi-
tions.
"OFF" position
All electrical circuits are cut off.
The engine will not start. The key
can be removed.
"ON" position
The ignition circuit is completed
and the engine can be started.
The headlight and taillght will
automatically turn on. The key
cannot be removed in this posi-
tion.
I NOTE: Start the engine promptly
after turning the key to the "ON"
position, or the battery wil lose
power due to consumption by the
headlight and taillght.
"LOCK" position
All electrical circuits are off. The
key can be removed and the
steering will be locked. Turn the
steering all the way to the left and
push down the key and turn it to
the "LOCK" position.
16
To Next Page
Loading...
