Engine Stop Switch CD
"~" position
The ignition circuit is off. The
engine cannot start or run.
"0" position
The ignition circuit is on and the
engine can run.
Front Brake Lever (2
Apply the front brake by squeez-
ing the front brake lever toward
the grip. The brake light will come
on when the lever is squeezed.
Front Brake Lever Adjustment
The distance between the throtte
grip and the front brake lever is
adjustable among 6 positions. To
change the position, push the
brake lever forward and
turn the
adjuster to the desired position.
Be sure the adjuster stops in the
proper position; a projection of the
brake lever holder should fit into
the depression of the adjuster.
This motorcycle is delivered from
the factory with its adjuster set on
position 4.
AWARNING
Adjusting the front brake lever
position while riding can be
hazardous. Removing a hand
from the handlebars can
reduce your abilty to control
the motorcycle.
Always keep both hands on the
handlebars while riding.
23
To Next Page
Loading...
