GSF1200AK6/SAK6 (’06-MODEL) 15
CAUTIONS IN SERVICING
ABS WIRING
• The ABS parts are connected to various lead wires. The cou-
pler and lead wire connections, as well as the lead wire and
wire harness routings must be done correctly. Make sure that
the proper clamps are used and positioned correctly.
NOTE:
If all of the connections are not properly connected, the ABS
may not operate correctly. For connector and coupler precau-
tions. (!GSF1200K6/SK6 00-2)
FUSES
• If a fuse is blown, find the cause of the problem and correct it
before replacing the fuse.
• Only use a fuse of the specified rating.
• Never improvise when replacing a fuse.
BATTERY
• Only use a fully charged battery.
• In order to prevent damage to the ABS control unit etc., be
sure to connect the battery properly.
• Never disconnect the battery or any other lead wires while the
engine is running.
NOTE:
For battery and battery connection precautions.
(!GSF1200K6/SK6 00-4)
Click
Click
SAMPLE
To Next Page
Loading...
