GSF1200AK6/SAK6 (’06-MODEL) 67
IRREPARABLE MALFUNCTIONS
Even though the ABS is operating correctly, a DTC is memo-
rized in any of the following conditions.
• After carrying out DTC deleting and ABS operation check
(!Page 34), explain to the customer that the ABS is oper-
ating correctly.
ABS COMPONENT REMOVAL, INSPECTION AND INSTALLATION
FRONT WHEEL SPEED SENSOR/SENSOR ROTOR
REMOVAL
$
• Raise the front wheel off the ground and support the motorcy-
cle with a jack or wooden block.
• Remove the front wheel speed sensor mounting bolts.
• Remove the front wheel assembly.
(!GSF1200K6/SK6 2D-4)
#
• Remove the front wheel speed sensor bracket
1.
Conditions
• If the motorcycle is put on its centerstand, the engine is
started and only the rear wheel is rotated.
• Previous malfunctions were repaired, but the DTCs were
not deleted.
* The ABS is made up of many precision parts; never
subject it to strong impacts or allow it to become
dirty or dusty.
* Do not hit the sensor rotor when dismounting the
wheel.
* The wheel speed sensor cannot be disassembled.
Make sure that the motorcycle is supported securely.
SAMPLE
To Next Page
Loading...
