34 GSF1200AK6/SAK6 (’06-MODEL)
DTC DELETING AND ABS OPERATION
CHECK
DTC DELETING
• Connect the special tool to the mode select coupler (O – B/W)
and output the DTCs.
" 09930-82710: Mode select switch
• While the DTCs are being output, set the special tool to OFF.
$
• In the DTC deletion mode, switch the ABS test switch from
OFF to ON three times, each time leaving it at ON for more
than 1 second.
The DTC deletion mode starts 12.5 seconds after the
switch is set to OFF.
SAMPLE
To Next Page
Loading...
