26 GSF1200AK6/SAK6 (’06-MODEL)
ABS COMPONENT
Wheel speed sensor – sensor rotor clearance
• Inspect the clearance between the wheel speed sensor and
sensor rotor for each wheel using the thickness gauge.
% Wheel speed sensor – sensor rotor clearance:
0.3 – 1.5 mm (0.012 – 0.059 in)
" 09900-20803: Thickness gauge
09900-20806: Thickness gauge
ABS control unit/HU ground wire inspection
• Turn the ignition switch to OFF.
• Remove the seat. (!GSF1200K6/SK6 9D-5)
• Disconnect the battery
- lead wire.
• Remove the left frame cover. (!GSF1200K6/SK6 9D-5)
• Remove the fuse box mounting bolt
1.
• Disconnect the ABS control unit coupler
2.
SAMPLE
To Next Page
Loading...
