Suzuki 2009 LT-R450 - Handlebar Installation

LT-R450/ZK9 (’09-MODEL) 33
THROTTLE BODY INSTALLATION
UPPER
LOWER
LOWER
INTAKE PIPE
OUTLET TUBE
UPPER
R
L
R
L
12 N·m
(1.2 kgf-m,
8.5 lbf-ft)
1.8 N·m
(0.18 kgf-m, 1.3 lbf-ft)
*2
*4
*3
*1
4.5 N·m
(0.45 kgf-m,
3.3 lbf-ft)
*1 Face the clamp ends right side. 4 Fuel feed hose No.2
*2 Pass the fuel vapor return hose through left side of the wiring harness. 5 Intake pipe
*3
Install the fuel feed hose No.2 with the white paint side to the fuel
pump.
6 Throttle body
*4 Pass the dust guard upward of the wiring harness. 7 Air cleaner
1 IAT sensor 8 Dust guard
2 Fuel vapor return hose 9 Fuel pump
3 Fuel feed hose No.1 0 Wiring harness