18
2. Remove the O-ring 1.
NOTE:
The O-ring may be fitted on the cover side.
3. Insert a flat blade screwdriver into the slot at
the mark on the cover to remove the bat-
tery.
NOTICE
If the O-ring is damaged, the waterproof
performance deteriorates, which can
cause the key-fob to malfunction.
Be careful not to damage the O-ring when
removing it.
4. Replace the battery so its + terminal faces
the cover side as shown in the illustration.
Lithium disc type battery: CR2025 or equiva-
lent.
Confirm that the O-ring is placed in position
on the body side.
5. Reinstall the cover.
To Next Page
Loading...
