EasyManua.ls Logo

Suzuki DF200AP - Battery Installation; Battery Requirement

Suzuki DF200AP
107 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
NOTE:
If equipped with Keyless Start System:
Turn the Keyless Start System to OFF state
before connecting or disconnecting the rotation
select connector.
If not equipped with Keyless Start System:
Turn the main switch OFF before connecting or
disconnecting the rotation select connector.
Regular select connector
Counter select connector
BATTERY INSTALLATION
BATTERY REQUIREMENT
850 Marine Cranking Amps (MCA)/ABYC,
or 670 Cold Cranking Amps (CCA)/SAE
or 180 Reserve Capacity (RC) Minutes/SAE
NOTE:
The specifications listed above are the mini-
mum battery rating requirements for starting
the engine.
If your boat application requires additional
battery loads, it is recommended that an aux-
iliary battery or batteries be installed. Consult
your Suzuki dealer for proper battery installa-
tion information.
Dual-purpose (Cranking/Deep-cycle) batter-
ies can be used if they meet the minimum
specifications listed above (MCA, CCA, or
RC).
Do not use a Deep Cycle battery for the main
cranking battery.
When connecting batteries in parallel, they
must be of the same type, capacity, manufac-
turer, and of similar age. When replacement
is necessary, they should be replaced as a
set. Consult your Suzuki dealer for proper
battery installation information.

Table of Contents

Related product manuals