49
OIL CHANGE REMINDER
SYSTEM
This system informs the operator of the time for
replacing engine oil on the basis of the mainte-
nance schedule.
The system is designed to register the total
operating hours of the outboard motor and indi-
cate when the preprogrammed number or
hours has been reached.
(Refer to the INSPECTION AND MAINTE-
NANCE section and the last page.)
SYSTEM ACTIVATION
When the total operating hours have reached
the preprogrammed hours, the “Change Oil” is
displayed on screen, and the buzzer sounds.
This indication will repeat until you cancel the
system activation.
CANCELLATION
1. If equipped with Keyless Start System:
Turn the Keyless Start System to ON state
by turn the main switch to the “ ” position
and then release it. The main switch auto-
matically returns to the “ ” position.
If not equipped with Keyless Start System:
Turn the main switch to the “ON” position.
2. Pull out the emergency stop switch lock
plate 1.
3. Push the start & stop switch 2 three times in
10 seconds. A short beep will be heard if the
cancellation is successfully finished.
To Next Page
Loading...
