18
If the key-fob battery runs low, “Remote Key
Battery Low” appears on the gauge, which indi-
cates the battery should be replaced.
To replace the key-fob battery:
1. Insert a flat blade screwdriver in the slot of
the key-fob and remove the cover.
NOTICE
To prevent damage to the key-fob, be
careful when replacing the battery.
• Install the lithium disc-type battery with
the electrodes facing the proper direc-
tion.
• Do NOT touch the internal circuit of the
key-fob when replacing the battery.
2. Remove the O-ring 1.
NOTE:
The O-ring may be fitted on the cover side.
3. Insert a flat blade screwdriver into the slot at
the mark on the cover to remove the bat-
tery.
NOTICE
If the O-ring is damaged, the waterproof
performance deteriorates, which can
cause the key-fob to malfunction.
Be careful not to damage the O-ring when
removing it.
To Next Page
Loading...
