UNCRATING 1-3
5. Remove the bolts D that tighten the steel
frame shown with in the illustration at 8
places in total, right and left.
6. Lift the steel frame E by two or more opera-
tors to remove it.
7. Remove styrofoam block F.
NOTE:
Use a hook that has a lifting capacity of at least
450 kg.
8. Remove the engine cover G.
9. Loosen two bolts I, on the right and left
each, and remove the binding strap H.
10. Attach sling straps to the hooks K, at two
points, using cushion J so as not to damage
the flywheel cover.
To Next Page
Loading...
