UNCRATING 1-5
LIFTING ENGINE
MOVING THE MOTOR
IN A VERTICAL POSITION
All three lifting eyes should be used after the engine has been
removed from the crate and is in a vertical position.
DO NOT USE FRONT LIFT EYE
WHEN UNCRATING THE ENGINE
The front lift eye is not designed nor intended to be
used for removing the engine from its horizontal posi-
tion in the shipping crate. Attempting to lift the motor
from its horizontal crated position using the front lift
eye creates a chain or sling angle which can cause the
motor to swing when it is lifted. This may result in
personal injury or cause damage to the engine block.
Use a hoist which has a minimum lift capacity of at
least 450 kg (1 000 lbs.) when lifting the motor .
EXAMPLE OF LIFTING DF200/225/250
EXAMPLE OF LIFTING DF90/115/140
To Next Page
Loading...
